Skip to content

Decorative anodising for industrial and product design

Product and design

Speak to a technician. Monday to Friday, 8:00 to 17:00 (CET).

Carta de colores de anodizado abierta en abanico

Industrial design

Design is approved on the sample

If you make your own product, the finish is part of your brand. We approve colour, gloss and texture on your part and repeat them exactly in every order, so your customer sees no difference from one batch to the next.

On a design piece, what separates good from perfect is not on the drawing: the direction of the brushing, how matt it ends up, the exact tone of a bronze.

So we settle colour, gloss and texture on your alloy before production. If it is for a production run, colour samples on your own part are free.

After that, every order repeats the same route: colour measured against the approved sample, grain in the same direction and handling that avoids scratches and fingerprints.

  • Samples on your own part, free for production runs
  • The same colour and grain in every order
  • Compatible with screen printing and laser marking
  • Sample part in about 72 hours
Request a quote

Parts

Parts we treat

Products, lighting, signage and furniture, in parts up to about 2 metres.

  • Electronics, home automation, retail

    Product housings

    Visible parts with the same finish in every batch.

    • Measured colour
  • Luminaires, legs, fittings

    Lighting and furniture

    Matching shade and texture, with the grain aligned.

    • Grain direction
  • Front panels and signs

    Signage and panels

    Surfaces ready for screen printing and laser engraving.

    • Print areas
  • Everyday use

    Handles and knobs

    Gloss or matt finishes that hide fingerprints.

    • Sealing
  • Trim and edging

    Short profiles

    The same colour between runs.

    • ΔE*ab ≤ 1.0 between batches
  • Before production

    Sample sets

    Colour and texture swatches to finalise the design.

    • Samples on your part

What we measure

What we check in every batch

Colour, gloss, texture and printing.

Colour and gloss

The colour of today’s run is the colour of the order you place a year from now. We measure it against your standard and keep a sample of every colour.

Typical values

  • Between batches: ΔE*ab ≤ 1.0
  • Measurement: Spectrophotometer, D65/10°
  • Reference: Your standard or the approved sample
  • Gloss: GU to your specification sheet

Texture and grain

The same satin or brushed finish on every part, in the same direction.

Ideally, send us a physical reference sample.

Typical values

  • Finish: Satin · brushed · polished
  • Direction: As on the drawing

Coating thickness

Whatever your specification states. If you do not have one, we advise you based on where the part will work.

Typical values

  • Thickness: To your specification
  • General reference: ISO 7599 classes
  • Measurement: Eddy current, at points on the drawing

Printing and laser

Areas for screen printing, UV printing or laser engraving, protected where needed.

Typical values

  • Screen / UV printing: Adhesion on anodising
  • Laser: Contrast set on the sample

Traceability and certificate

Every batch leaves labelled and, if you ask for it, with its certificate of conformity. If something needs tracing one day, it can be found.

Typical values

  • Label: Order · batch · date
  • Certificate of conformity: Per batch, on request
  • Records: Kept on file for audits

How we work

From sample to production run

Lead times are for guidance: they depend on volume, workload and any tests the project requires.

  1. Design brief

    Under 24 h

    Colour references (sample, RAL or Pantone), gloss and texture.

  2. Sample set

    About 72 h

    Samples or a sample part to approve shade, gloss and texture.

  3. Production run

    5–10 working days

    Production on the approved route, with careful handling and traceability per batch.

  4. Delivery

    At our plant or by carrier

    Final inspection, a certificate of conformity if you ask for it, and packaging that protects the finish.

Frequently asked questions

Frequently asked questions

Can you match a Pantone or RAL colour?

Yes, as a starting point. What is reliable is a physical sample: we prepare samples on your alloy and you approve the right one before production.

Do samples cost anything?

If they are for a production run, colour samples on your own part are free.

Which textures do you offer?

Satin, brushed and polished, with the gloss and grain direction set out in your design specification.

Can the parts be screen printed or laser engraved?

Yes. We define the print and engraving areas, protect them where needed and check the result on the sample.

Do you make prototypes and short runs?

Yes, as a step towards production, with no published minimum order. Where we serve you best is on products that are reordered.

Shall we prepare a sample set?

Call and tell us about your product. A technician suggests colours and finishes for your alloy and, if it is for a production run, we make the samples on your own part at no cost.

Speak to a technician. Monday to Friday, 8:00 to 17:00 (CET). Leave your number and we will call you back within the hour.

Direct contact

Plant
Carrer dels Remences, 114, 08304 Mataró (Barcelona)