Skip to content

Anodising for automotive parts

Automotive suppliers

Speak to a technician. Monday to Friday, 8:00 to 17:00 (CET).

Carrocería de aluminio en una línea de montaje de automóviles

Automotive

An approved part cannot change

If you make parts for the automotive industry, batch fifty has to come out like the first and arrive on the agreed day. A sample part in about 72 hours, production runs in 5 to 10 working days and the same colour order after order.

In automotive, an approved part has to be repeated exactly for years. A different shade or a late batch becomes a problem with your customer.

So we fix the finish on a sample part and the production run repeats that same route. Every batch leaves labelled and, if you ask for it, with its certificate of conformity.

Our own plant in Mataró, about 30 km from Barcelona, with no middlemen. You speak to the people who treat your parts: they tell you which treatment suits them, and when you do not need that much.

  • Sample part in about 72 hours
  • Production runs in 5 to 10 working days
  • The same colour from one batch to the next
  • Certificate of conformity per batch
Request a quote

Parts

Parts we treat

Small and medium-sized parts, up to about 2 metres, from prototype to production.

  • Interior and exterior

    Housings and brackets

    Visible parts that have to protect and look right.

    • Measured colour
    • Sealing
  • On show

    Profiles and trim

    The same shade on every part and in every order.

    • ΔE*ab ≤ 1.0 between batches
  • Assembly

    Connectors and fittings

    A finish that respects threads and fits.

    • Threads protected
    • Traceability
  • Enclosures

    Electronics and heat sinks

    A clean appearance and, where needed, conductive earth points.

    • Uniform finish
    • Conductive areas
  • Electric vehicles

    Battery components

    Covers, brackets and housings with protection and a repeatable shade.

    • Testing on request
    • Confidentiality
  • Before launch

    Prototypes and pre-series

    Samples to sign off the finish before production.

    • Sample in about 72 h

What we measure

What we check in every batch

What your customer will ask you for, measured and in writing.

Coating thickness

Whatever your specification states. If you do not have one, we advise you based on where the part will work.

Typical values

  • Thickness: To your specification
  • General reference: ISO 7599 classes
  • Measurement: Eddy current, at points on the drawing

Colour between orders

The colour of today’s run is the colour of the order you place a year from now. We measure it against your standard and keep a sample of every colour.

Typical values

  • Between batches: ΔE*ab ≤ 1.0
  • Measurement: Spectrophotometer, D65/10°
  • Reference: Your standard or the approved sample

Sealing

Sealing is what makes anodising last. If your specification calls for a sealing test, we test every batch.

Typical values

  • Test: Per batch, if the specification requires it
  • Report: Supplied with the batch

Corrosion testing

If your customer requires salt spray testing, we arrange it with an accredited laboratory and the report goes with the batch.

Reference standards: ISO 9227

Typical values

  • Hours: As stated in your specification
  • Report: From an accredited laboratory

Traceability and certificate

Every batch leaves labelled and, if you ask for it, with its certificate of conformity. If something needs tracing one day, it can be found.

Typical values

  • Label: Order · batch · date
  • Certificate of conformity: Per batch, on request
  • Records: Kept on file for audits

How we work

From sample to production run

Lead times are for guidance: they depend on volume, workload and any tests the project requires.

  1. Requirements

    3–5 days

    You tell us what your customer requires: drawing, colour, critical dimensions and documentation.

  2. Sample on your part

    About 72 h

    We treat a few parts on the production route for you to approve.

  3. Production run

    5–10 working days

    The same route you approved on the sample, with a control plan per part family and records for every batch.

  4. Delivery

    At our plant or by carrier

    Final inspection, a certificate of conformity if you ask for it, and packaging that protects the finish.

Frequently asked questions

Frequently asked questions

Which alloys do you treat for automotive?

Mainly 5xxx and 6xxx series, such as 5754, 6061 or 6082. We validate other alloys first with a sample part.

What coating thickness do you apply?

Whatever your specification, or your customer’s, states. If it is not defined, we advise you based on where the part goes, using the ISO 7599 classes as a general reference.

How do you keep the same colour between orders?

We work to your standard, measure every batch and keep a sample of every colour. Between batches, the difference stays within ΔE*ab ≤ 1.0.

Do you have a minimum order?

We do not publish a minimum. We take on prototypes and pre-series as a step towards production; where we serve you best is on repeat runs.

Do you accept supplier audits?

Yes. We host audits and share procedures and records under a confidentiality agreement.

Can you work for us from outside Spain?

Yes, from anywhere in Spain and the rest of the EU. Parts reach us and go back by carrier; who arranges and pays for transport is agreed in the quotation. We deal with you in English by phone and email.

Shall we talk about your part?

Call and speak to a technician. We tell you which treatment you need and the lead time, and send you a price within 24 hours.

Speak to a technician. Monday to Friday, 8:00 to 17:00 (CET). Leave your number and we will call you back within the hour.

Direct contact

Plant
Carrer dels Remences, 114, 08304 Mataró (Barcelona)