Facilities
The BUCI Tratamientos del Aluminio, S.L. plant in Mataró, about 30 km from Barcelona: treatment lines, laboratory and dispatch for parts up to about 2 metres long. Your parts are prepared, treated and inspected here, without passing through other hands.

Areas and processes
What happens to your part inside, from loading bay to dispatch
Everything under one roof, from loading bay to dispatch: less transport, fewer knocks, one person responsible for your part and every step recorded.
- Goods-inWe check what arrives, label it by batch and confirm it matches your order and your documents.
- PreparationWe degrease, etch and condition the surface so the finish comes out the same across the whole part.
- TreatmentClear, colour and black anodising, passivation, electropolishing, polishing and bead blasting.
- LaboratoryWe measure coating thickness, compare the colour of every batch with your sample and, if your specification calls for it, test the sealing. Everything is recorded and can be audited.
- DispatchWe protect the finish for transport, label every batch and dispatch in order of arrival, order by order.

Tank line
This is where your parts are anodised. The tanks, seen from the overhead crane.

Racks
Every part is racked before it enters the line. We agree the contact points with you.

Unracking
Parts anodised in red, taken off the rack by hand.

Bead blasting
A freshly blasted part, with the even matt surface that is then anodised.

Long runs
Hundreds of identical parts, racked and ready to treat. This is what the plant is built for.

The plant
Carrer dels Remences, 114, Mataró, reached via the C-32 motorway and the N-II.
Location
How to reach us and how to get your parts to us
Bring your parts to the plant by appointment or send them to us by carrier from anywhere in Spain or the rest of the EU.
- Address
- Carrer dels Remences, 114, 08304 Mataró (Barcelona)
- Delivery to the plant
- By appointment, Monday to Friday, 8:00 to 17:00 (CET).
- Shipping by carrier
- From anywhere in Spain or the rest of the EU. Who arranges and pays for transport is agreed in the quote.
- Collection
- We do not run our own collection service. If you cannot bring your parts, send them by carrier.
- Access
- Via the C-32 or the N-II, for vans and light lorries. About 30 km from Barcelona.
Come and see the plant on a technical visit
Call us to arrange it: we walk you through the lines and the laboratory, and review your part and your technical and logistics requirements with the technician who will treat it. There is parking for loading and unloading and, if you need one, we sign a non-disclosure agreement.
Speak to a technician. Monday to Friday, 8:00 to 17:00 (CET). Leave your number and we will call you back within the hour.
Direct contact
- Phone
- +34 937 55 62 77
- bucisl@bucisl.com
- Plant
- Carrer dels Remences, 114, 08304 Mataró (Barcelona)
