Skip to content

Aerospace anodising and conversion coating

Parts with documentation

Speak to a technician. Monday to Friday, 8:00 to 17:00 (CET).

Ala de avión de aluminio sobre un mar de nubes

Aerospace

A special process: without the paperwork, the part is no good

In aerospace, if it is not recorded, it was not done. If you machine avionics parts, structures or cabin interiors, we provide Type II anodising and conductive conversion coating with records for every batch and the documentation your customer asks for.

An aerospace part can be perfect and still be held up because a record is missing. Surface treatment is a special process, and your customer will ask you for evidence of every step.

We agree the requirements with you before the sample, measure thickness with calibrated equipment, protect threads and fits, and keep the evidence for every batch. We work to requirements equivalent to MIL-PRF-8625 Type II (anodising) and MIL-DTL-5541 (trivalent conversion coating), used as references rather than approvals, and if you need it we prepare a basic FAI to AS9102.

We do not do hard anodising. If your part needs it, we tell you on the first call.

  • Type II anodising and conductive conversion coating
  • Records and certificate per batch
  • Sample part in about 72 hours
  • External tests arranged and basic FAI, if you need it
Request a quote

Parts

Parts we treat

Parts up to about 2 metres, functional and visible, with the requirements in writing.

  • Instrumentation

    Avionics enclosures

    A technical finish with controlled thickness and shade, with threads and label areas protected for assembly.

    • Measured colour
    • Masking
  • Brackets, flanges, clamps and frames

    Lightweight structures

    Technical anodising against wear, without going out of tolerance.

    • Thickness measured
    • Control plan
  • Visible parts

    Cabin interiors

    The same colour, gloss and appearance on every panel.

    • Measured colour
    • Sealing
  • Thermal management

    Heat sinks

    A stable, uniform finish, compatible with the fasteners.

    • Uniform finish
  • Workshop and line

    Tooling and ground equipment

    Robust finishes for repeated use, with contrast colours to identify each part.

    • Contrast colour
    • Traceability
  • Validation

    Prototypes and qualification

    Samples with test coupons and documentation for the FAI.

    • Test coupons
    • Optional FAI

What we measure

What we check in every batch

Thickness, conductive conversion coating, appearance and traceability.

Technical anodising (Type II)

Protection and appearance for visible and functional parts, with the thickness and tolerances of your specification measured at points on the drawing.

Reference standards: MIL-PRF-8625 Type II (reference)

Typical values

  • Thickness: To your specification
  • Measurement: Eddy current
  • Sealing: To your requirement

How we check it

  • Calibrated equipment
  • Measured at points on the drawing
  • Signed release

Conductive conversion coating (passivation)

Protects the part and keeps electrical continuity on earth points and shielding. No hexavalent chromium.

Reference standards: MIL-DTL-5541 (reference)

Typical values

  • Type: Conductive trivalent conversion coating
  • Class: Conductive, to your specification
  • Use: Earthing, shielding, paint, adhesive

Colour of visible parts

The colour of today’s run is the colour of the order you place a year from now. We measure it against your standard and keep a sample of every colour.

Typical values

  • Between batches: ΔE*ab ≤ 1.0
  • Measurement: Spectrophotometer, D65/10°
  • Reference: Your standard or the approved sample

Traceability and FAI

Every batch leaves labelled and, if you ask for it, with its certificate of conformity. If something needs tracing one day, it can be found.

Typical values

  • Label: Order · batch · date
  • Certificate of conformity: Per batch, on request
  • Records: Kept on file for audits
  • FAI: Basic, to AS9102, on request

How we work

From sample to production run

Lead times are for guidance: they depend on volume, workload and any tests the project requires.

  1. Requirements and confidentiality

    3–5 days

    Alloy, treatment (Type II anodising or conversion coating), critical areas, shades, acceptance criteria and the documentation your customer requires, under a confidentiality agreement if needed.

  2. Sample and test coupons

    About 72 h

    We treat parts and test coupons on the production route for you to approve.

  3. Production run

    5–10 working days

    A qualification batch with a control plan and, if you ask for it, documentation for the FAI.

  4. Delivery

    At our plant or by carrier

    Final inspection, a certificate of conformity if you ask for it, and packaging that protects the finish.

Frequently asked questions

Frequently asked questions

Which alloys do you treat for aerospace?

2xxx, 5xxx, 6xxx and 7xxx series, such as 2024, 5083, 6061, 6082 or 7075. We validate the process by part family and, for 2xxx and 7xxx, always with a sample part.

Do you work to MIL-PRF-8625 and MIL-DTL-5541?

We work to equivalent requirements, using them as references, and agree the exact requirements with you. If you need specific documentation, we look at it case by case.

Can you prepare an FAI?

Yes, a basic FAI to AS9102 (dimensional and process evidence), on request and with the agreed scope.

Do you do hard anodising (Type III)?

No. We do Type II technical and decorative anodising, natural and coloured, conductive conversion coating, passivation, electropolishing and bead blasting. If your part needs hard anodising, we tell you on the first call.

What are your lead times?

A sample part in about 72 hours and production runs in 5 to 10 working days, as a guide depending on volume and workload. More than 99% of deliveries leave on time.

Do you arrange external testing?

Yes: corrosion or adhesion tests with accredited laboratories, with the report attached to the batch.

Shall we review your specification?

Call and a technician will go through what your customer requires with you. We tell you whether we can do it and the lead time, and send you a price within 24 hours.

Speak to a technician. Monday to Friday, 8:00 to 17:00 (CET). Leave your number and we will call you back within the hour.

Direct contact

Plant
Carrer dels Remences, 114, 08304 Mataró (Barcelona)