Skip to content

Certifications, quality and compliance

ISO 9001, REACH and RoHS, with traceability and a certificate of conformity for every batch: the documents your customer asks for, with every delivery.

Desmontaje de tapones anodizados en rojo, retirados a mano del bastidor

The system

A system you can audit

ISO 9001 certified company seal, issued by CDQ and accredited by ENAC

BUCI Tratamientos del Aluminio, S.L. works to ISO 9001, certified by CDQ under ENAC accreditation, and complies with Spanish and European regulations: REACH, RoHS, health and safety and environmental management. Every batch is recorded, so you know what was done to your parts.

ISO 9001

It covers everything we do (anodising, passivation, electropolishing, polishing and bead blasting), from goods-in to dispatch, with defined processes, responsibilities and indicators. (Quality management system)

  • Control plan for each part family
  • Every batch linked to its order and date
  • Bath time, temperature, pH and conductivity recorded
  • Final inspection and documented release before it leaves

REACH and RoHS

We control the substances that go into our baths. If your customer asks for a declaration of conformity, we send it to you. (EC 1907/2006 · 2011/65/EU and 2015/863)

  • Passivation free of hexavalent chromium
  • Safety data sheets for baths, chemicals and consumables
  • Monitoring of regulatory changes and assessment of critical suppliers
  • Up-to-date declarations of conformity, on request

Safety and environment

Occupational risk prevention plan and environmental and waste management under Spanish and Catalan regulations. (Spanish Law 31/1995 · Law 7/2022)

  • Training and PPE for each job
  • Emergency plan and preventive maintenance
  • Waste handled by authorised contractors

Method

How we control and audit your order

From the first call to delivery, every step is documented, with traceability by batch.

  • What your part requiresBefore we start, we agree with you the finish, the colour, the applicable standards and the acceptance criteria for each part family. If you have a specification, we work to it.
  • A sample before the runA pilot part in around 72 hours. For production runs, the colour sample on your part is free of charge.
  • Control on the lineA control plan for each part family: we record the parameters of every batch, check the critical ones on a set schedule and compare the colour with your sample.
  • Inspection and certificateFinal inspection, batch release and a certificate of conformity with your order, the batch and the date.
  • Continuous improvementInternal audits, a record of non-conformities and corrective and preventive actions. Management reviews the system.

Testing

What we measure and what we give you

Across all our aluminium surface treatments, we measure what your specification calls for. If you audit us, we show you the technical documentation and records under a non-disclosure agreement.

Coating thickness

We measure it against the thickness and tolerance in your specification, and it is noted on the work order. If you have no specification, we guide you with the usual ISO 7599 classes.

Typical values

  • Method: Eddy current
  • Reference: Your specification
  • Record: By work order and batch

Sealing and porosity

If your specification calls for it, we check the sealing and porosity of every batch on a representative test piece.

Typical values

  • When: If the specification calls for it
  • Report: On request

Appearance and colour

We check the appearance part by part, with basic metrology, and compare the colour of every batch with your sample or reference standard, so that next year’s order comes out the same.

Typical values

  • Colour: ΔE*ab ≤ 1.0 between batches
  • Appearance: Uniformity and gloss

External testing

If you need a salt spray test or another test, we commission it from an accredited laboratory: we send the samples and pass the report on to you.

Reference standards: ISO · ASTM

Typical values

  • Salt spray: ISO 9227
  • Laboratory: Accredited

Certificate for every batch

With your order reference, the batch and the date, and the critical parameters where relevant. Signed by the quality manager.

Typical values

  • Reference: Order · batch · date
  • Signed by: Quality manager

Frequently asked questions

Frequently asked questions

What does BUCI’s ISO 9001 cover?

All the treatments we carry out (anodising, passivation, electropolishing, polishing and bead blasting), from the moment your parts arrive until they leave. It is certified by CDQ under ENAC accreditation.

Do you issue a certificate of conformity for each batch?

Yes, on request. It carries your order reference, the batch and the date, and can include the applicable standard and the critical parameters.

Do you comply with REACH and RoHS?

Yes. We control substances under REACH and RoHS and send you the declaration of conformity if you need it. Our passivation is always free of hexavalent chromium.

Can we audit you as a supplier?

Yes. We schedule the audit with you and show you procedures, technical data sheets and records under a non-disclosure agreement.

What coating thickness and tests do you offer?

The thickness your specification calls for; if you have none, we guide you with the usual ISO 7599 classes. Sealing tests per batch, if the specification calls for them. And salt spray testing, through an accredited laboratory.

What are your lead times?

A pilot part in around 72 hours and production runs in 5 to 10 working days, for guidance, depending on volume and workload. More than 99% of our deliveries arrive on time.

How quickly do you respond?

If you call, a technician answers straight away, in English if you prefer. If you leave your number, we call you back within the hour during working hours. Quotes within 24 hours.

Do you work with companies outside Spain?

Yes, across Spain and the rest of the EU. Parts arrive and return by carrier; who arranges and pays for transport is agreed in the quote. You can also bring them to the plant in Mataró by appointment. We do not run our own collection service.

How do you protect the finish in packaging?

With packaging suited to each finish, or your own if you prefer, labelled by batch to keep traceability.

Do you run a trial before the production run?

Yes. We treat a sample on your part in around 72 hours so you can approve the finish and colour. For production runs, it is free of charge.

Asked for a specific certificate, or preparing an audit?

Call us and tell the technician what your customer requires. We tell you what we can certify with each batch and which tests are needed, and provide certificates, declarations of conformity and process records for your supplier approval.

Speak to a technician. Monday to Friday, 8:00 to 17:00 (CET). Leave your number and we will call you back within the hour.

Direct contact

Plant
Carrer dels Remences, 114, 08304 Mataró (Barcelona)