Skip to content

Black anodising: matt black aluminium that does not peel

The black is inside the metal, not on top. And your next order will match today’s.

Speak to a technician. Monday to Friday, 8:00 to 17:00 (CET).

Aletas de un disipador de aluminio en negro

The black

A black that does not peel

Black paint on aluminium ends up chipping at the corners and wherever it rubs. Black anodising does not: the colour is inside the layer of the metal itself.

It is one of the most requested finishes for furniture, lighting, electronics and machinery. And one of the hardest to repeat: a black that comes out brown or bluish is noticed at once.

Matt or gloss

The sheen is decided before the colour

  • Matt blackGlass bead blasting or chemical satin finishing before anodising. A silky look that hides fingerprints and marks.
  • Satin blackBrushing or fine satin finishing. The grain runs in the same direction on every part.
  • Gloss blackPolishing before anodising. Very elegant, but it shows fingerprints more.
Bead blasting

Indoor or outdoor

Which black for where it goes

  • OutdoorElectrolytic black, the most stable in sunlight, with the thickness the environment calls for and good sealing. Some dyed blacks turn purple or brown after years of sun: we do not recommend them outdoors.
  • IndoorOrganic dye or electrolytic black: more options for a deep black.

Order after order

The same black in every batch

We agree a master sample with you and measure the colour of every batch against it. So the black on your order a year from now is the same as today’s.

Anodising colours

Frequently asked questions

Frequently asked questions

Does black anodising fade?

Electrolytic black is very stable in sunlight. Some dyed blacks can lighten or change shade after years of direct sun: that is why we use electrolytic black outdoors.

Can aluminium be anodised matt black?

Yes. The matt finish is created before anodising, with glass bead blasting or chemical satin finishing.

Why does black anodising come out brown, blue or purple?

Because of the alloy, a layer that is too thin or insufficient colouring; and outdoors, a dye that cannot stand the sun. It is avoided with a master sample, by measuring every batch and by choosing the black for where the part will go.

Which alloys look best in black?

The 6000 series, the most common in machining, gives the most even black. With 2000, 7000 and castings we run a sample first.

Does black anodising scratch?

It is much harder than paint, but a heavy knock can reach the aluminium, which is silver. On parts that see a lot of wear, matt hides it better.

Do you need your parts in black?

Call +34 937 55 62 77 and we will prepare a black sample on your own part. For production runs, free of charge.

Speak to a technician. Monday to Friday, 8:00 to 17:00 (CET). Leave your number and we will call you back within the hour.

Direct contact

Plant
Carrer dels Remences, 114, 08304 Mataró (Barcelona)