How much does anodising cost? The price per part explained
It depends on the part, the quantity and the colour. With a drawing or a photo with dimensions, we quote in under 24 hours.
Speak to a technician. Monday to Friday, 8:00 to 17:00 (CET).

The short answer
You pay for space in the bath, not for the kilo
Anodising means hanging parts on a rack and lowering them into a bath. What costs money is the space they take up, the work of racking them and whatever has to be done beforehand.
That is why no price per kilo works: a light but large part takes up as much room as many small ones.
What drives it
What raises or lowers the price
- Size and shapeHow many parts fit in each load and how they are hung. We treat parts up to about 2 metres.
- QuantityPart of the work is the same for ten parts as for a thousand.
- PreparationBead blasting, polishing or satin finishing add a step.
- ColourNatural is the baseline. Colour adds a step, and a new colour, the samples.
- MaskingProtecting threads or areas that are not treated is manual work.
- Thickness and paperworkA thicker layer means more time in the bath. Plus any tests or certificates your specification requires.
The production run
Why a repeat run works out cheaper
The first time, everything is set up: how the part is racked, the colour, the areas to mask. On the following orders that is already done, and the price per part comes down.
You also know what you pay and what you get: the same finish and the same colour, in 5 to 10 working days.
To quote you
What we need
- A drawing, a 3D model or a photo with dimensions.
- The alloy, if you know it.
- How many parts per order and how often it repeats.
- Finish and colour.
- Threads or areas that must not be treated.
Frequently asked questions
Frequently asked questions
How much does it cost to anodise an aluminium part?
It depends on the size, the quantity, the colour and the preparation. With a drawing or a photo with dimensions, we quote in under 24 hours.
Is anodising charged by the kilo?
No. It is quoted per part or per batch, according to the space it takes up in the bath and the work involved.
Is there a minimum order?
We have no published minimum. We work mainly with repeat production runs, and we take on prototypes and short runs as a step towards them.
Do you anodise one-off parts for private individuals?
No. We only work for businesses.
What size of part do you treat?
Small and medium-sized parts, up to about 2 metres: machined parts, covers, brackets, housings or short extrusions. Full 6-metre bars, no.
A price in under 24 hours
Call +34 937 55 62 77 and tell us about the part and the quantity. We ask for the drawing by email and you have the quotation in under 24 hours.
Speak to a technician. Monday to Friday, 8:00 to 17:00 (CET). Leave your number and we will call you back within the hour.
Direct contact
- Phone
- +34 937 55 62 77
- bucisl@bucisl.com
- Plant
- Carrer dels Remences, 114, 08304 Mataró (Barcelona)

