Skip to content

Anodising for engineering and machinery

Machine shops

Speak to a technician. Monday to Friday, 8:00 to 17:00 (CET).

Fresadora CNC mecanizando un bloque de aluminio entre virutas

Engineering and machinery

Anodising takes up space too

You machine the part; we anodise it without taking it out of tolerance. Threads and seats protected, a sample in about 72 hours and production runs in 5 to 10 working days, so the finish does not hold up your delivery.

An anodic layer seems like nothing until a bearing will not go into its seat. On a machined part, the treatment is part of the fit.

So we go through the critical dimensions with you, protect threads, seats and sealing faces, and check it all on a sample part before production. If an area has to conduct, we passivate it and anodise the rest.

You speak directly to the people who treat your parts, at our own plant in Mataró, about 30 km from Barcelona. We tell you which treatment suits the part, and when it is not needed.

  • Threads, seats and fits protected
  • Sample part in about 72 hours
  • Production runs in 5 to 10 working days
  • More than 99% of deliveries on time
Request a quote

Parts

Parts we treat

Small and medium-sized parts, up to about 2 metres, that have to fit together.

  • Housings, brackets, covers

    Precision machined parts

    A finish that respects tolerances and mating surfaces.

    • Masking
  • Daily use in the workshop

    Tooling and fixtures

    Treatments that withstand use, and colours to identify them.

    • Contrast colour
  • Machine frames

    Brackets and short profiles

    Protection and the same finish on every run.

    • Measured colour
  • Automation

    Actuators and sensors

    An industrial look with threads and seals kept safe.

    • Threads protected
  • Thermal

    Heat sinks

    A uniform finish without losing performance.

    • No scratches
  • Before production

    Prototypes and short runs

    Samples to fix the finish before moving to production.

    • Sample in about 72 h

What we measure

What we check in every batch

Dimensions, thickness, conductivity and traceability.

Threads and critical areas

Whatever must not take a coating is protected, so the part fits exactly as it did before treatment.

Typical values

  • Masking: Threads · seats · guides
  • Faces: Sealing faces

How we check it

  • Selective masking
  • Fit checked on the sample

Coating thickness

Whatever your specification states. If you do not have one, we advise you based on where the part will work.

Typical values

  • Thickness: To your specification
  • General reference: ISO 7599 classes
  • Measurement: Eddy current, at points on the drawing

Conductivity

Where the part has to conduct, passivation; everywhere else, sealed anodising.

Typical values

  • Conductive: Passivation
  • Insulating: Sealed anodising

Roughness

Bead blasting or polishing beforehand to meet the roughness on the drawing.

Typical values

  • Ra: As per drawing
  • Preparation: Bead blasting or polishing

Traceability and certificate

Every batch leaves labelled and, if you ask for it, with its certificate of conformity. If something needs tracing one day, it can be found.

Typical values

  • Label: Order · batch · date
  • Certificate of conformity: Per batch, on request
  • Records: Kept on file for audits

How we work

From sample to production run

Lead times are for guidance: they depend on volume, workload and any tests the project requires.

  1. Drawing review

    Under 24 h

    We go through the critical dimensions, the areas to protect and the finish with you.

  2. Sample on your part

    About 72 h

    We treat a few parts and check they fit before production.

  3. Production run

    5–10 working days

    The same route you approved on the sample, with a control plan per part family and records for every batch.

  4. Delivery

    At our plant or by carrier

    Final inspection, a certificate of conformity if you ask for it, and packaging that protects the finish.

Frequently asked questions

Frequently asked questions

Does anodising change the part’s dimensions?

Yes, slightly: part of the layer grows outwards. It shows on threads and fits, so we protect them or allow for it, and check it on the sample.

Can you protect threads and seats?

Yes. Mark them on the drawing or in a list of critical dimensions. You email us the drawing after the first call.

I need some areas to conduct. What do you do?

Passivation on the areas that have to conduct and sealed anodising everywhere else. Tell us which surfaces they are.

Do you have a minimum order?

We do not publish a minimum. We take on prototypes and short runs as a step towards production; where we serve you best is on repeat runs.

Which alloys do you treat?

Mainly 5xxx and 6xxx series. Other alloys and castings we assess case by case, with a sample part.

Can you take work from machine shops outside Spain?

Yes, from anywhere in Spain and the rest of the EU. Parts reach us and go back by carrier; who arranges and pays for transport is agreed in the quotation.

Shall we look at your drawing?

Call and speak to a technician: we tell you how to treat the part without taking it out of tolerance, and the lead time. Then you email us the drawing and we send you a price within 24 hours.

Speak to a technician. Monday to Friday, 8:00 to 17:00 (CET). Leave your number and we will call you back within the hour.

Direct contact

Plant
Carrer dels Remences, 114, 08304 Mataró (Barcelona)